Builders replace steel with basalt polymers and tire waste in seawater concrete, eliminating marine corrosion and reducing repair costs.
Marine infrastructure faces persistent durability challenges as seawater exposes concrete structures to chlorides, moisture, and repeated mechanical loading. Chloride penetration can accelerate corrosion of conventional steel reinforcement, contributing to cracking, concrete deterioration, and costly repairs. Researchers are investigating basalt-fiber-reinforced polymer (BFRP) rebars as an alternative to conventional steel reinforcement. Combined with recycled tire steel fibers (RTSF), these composites could improve certain mechanical properties while creating opportunities to reuse materials from end-of-life tires.
Recent studies have examined how BFRP rebars interact with seawater and sea-sand concrete and how recycled steel fibers affect the bond between reinforcement and the surrounding concrete.
You can also read: Basalt Fibers in Marine Composites: A Reliable Solution?
Conventional concrete production relies heavily on freshwater and natural aggregates. In coastal regions, seawater and sea sand offer potential alternatives that could reduce demand for freshwater and some inland resources. However, seawater introduces chlorides and other dissolved salts that can accelerate corrosion of conventional steel reinforcement. This limits its suitability for many reinforced concrete applications without additional protective measures. BFRP rebars provide an alternative because they do not undergo the same electrochemical corrosion process as steel. Researchers are therefore investigating seawater and sea-sand concrete reinforced with BFRP for applications such as coastal structures, bridges, and marine infrastructure. Nevertheless, using seawater and sea sand requires careful consideration of aggregate quality, material compatibility, and long-term durability.
Glass- and basalt-fiber-reinforced polymer rebars investigated for marine applications. Courtesy of Bond Behavior of Recycled Tire Steel-Fiber-Reinforced Concrete and Basalt-Fiber-Reinforced Polymer Rebar After Prolonged Seawater Exposure.
Manufacturers produce basalt fibers by melting basalt rock and drawing the molten material into continuous filaments. They combine these fibers with a polymer resin to manufacture composite reinforcing bars. The resulting BFRP rebars offer high tensile strength relative to their weight and resistance to electrochemical corrosion. Unlike conventional steel reinforcement, BFRP does not rust and expand when exposed to chlorides. This characteristic can help reduce corrosion-related deterioration in marine concrete structures. However, BFRP performance depends on the fiber properties, resin chemistry, fiber–matrix interface, and environmental exposure conditions. Prolonged exposure to moisture, alkaline concrete pore solutions, and elevated temperatures can affect composite durability. Engineers must therefore evaluate long-term mechanical performance rather than assuming that BFRP eliminates all maintenance requirements.
Schematic illustration of the bond mechanisms and radial stress distribution in BFRP-reinforced concrete during pullout testing. Courtesy of Study on the Bonding Performance of BFRP Bars with Seawater Sand Concrete.
The bond between reinforcing bars and concrete plays a critical role in transferring mechanical loads. Researchers have investigated whether recycled tire steel fibers can improve this interaction by modifying the mechanical behavior of the surrounding concrete. These fibers, recovered from end-of-life tires, can help bridge developing cracks and limit crack propagation within the cementitious matrix. A study published in Sustainability examined the bond behavior of BFRP rebars embedded in concrete containing recycled tire steel fibers following seawater exposure.
The researchers reported improvements in bond strength when recycled tire steel fibers replaced part of the conventional steel fiber reinforcement.
| Loading condition | Reported bond-strength improvement |
|---|---|
| Static loading | 6.3% |
| Fatigue loading | 10.0% |
Reported improvements at 50% recycled tire steel fiber replacement, relative to the study’s reference mixture. Adapted from Bond Behavior of Recycled Tire Steel-Fiber-Reinforced Concrete and Basalt-Fiber-Reinforced Polymer Rebar After Prolonged Seawater Exposure.
These results suggest that recycled tire steel fibers can contribute to reinforcement bond performance under the tested conditions. However, improvements in bond strength do not automatically translate into equivalent increases in overall structural strength or service life. Additionally, recycled tire steel fibers remain susceptible to corrosion. Their long-term behavior in chloride-rich environments requires further consideration, particularly when cracking exposes embedded fibers to seawater.
Combining BFRP reinforcement with recycled tire steel fibers introduces opportunities to improve material performance while recovering valuable resources from waste tires.
However, several factors remain important before widespread implementation:
These considerations are particularly relevant for marine structures exposed to continuous moisture, chloride penetration, and cyclic loading.
BFRP rebars offer a promising alternative to conventional steel reinforcement in marine concrete, while recycled tire steel fibers may improve bond performance and crack control. The research highlights how composite materials and recovered reinforcement fibers can contribute to new approaches in concrete engineering. However, laboratory improvements must be supported by long-term durability testing and structural validation before manufacturers and construction companies can establish their suitability for large-scale marine applications. Rather than eliminating maintenance or corrosion concerns entirely, these technologies offer opportunities to address specific limitations of conventional reinforced concrete.
Regulatory restrictions, formulation challenges, and volatile raw material costs are reshaping flame-retardant compounds. Smaller suppliers…
At PACK EXPO 2026, South Korea's SR TECHNOPACK discussed PVOH barrier coatings, RecyClass approval, and…
Researchers optimize carbon fiber-reinforced PA6 through fiber loading, cooling control, and processing parameters to improve…
Bisurea-based nucleating agents accelerate PA6 crystallization, favor α-phase formation, and improve optical clarity in injection-molded…
Machine learning is giving plastics processors a faster way to match color by linking inline…
Analytical limitations, inconsistent measurement methods, and uncertain contamination sources complicate efforts to assess microplastics and…