--- title: "Thermoplastic Polyurethane Foams for Wearable Electronics" id: "12011" type: "post" slug: "thermoplastic-polyurethane-foams-for-wearable-electronics" published_at: "2026-09-04T13:46:47+00:00" modified_at: "2026-08-31T14:49:21+00:00" url: "https://www.plasticsengineering.org/2026/09/thermoplastic-polyurethane-foams-for-wearable-electronics-012011/" markdown_url: "https://www.plasticsengineering.org/2026/09/thermoplastic-polyurethane-foams-for-wearable-electronics-012011.md" excerpt: "Foam Additive Manufacturing tunes TPU foam conductivity for flexible electronics by adjusting temperature and print speed." taxonomy_category: - "3D Printing/Additive Manufacturing" - "Editor's Choice Technical Paper" - "Education & Training" - "Electrical & Electronics" - "Foam Processing" - "Foaming Agents" - "Industry" - "Materials" - "Process" - "Thermoplastics" - "Trending" taxonomy_post_tag: - "CO2 foaming" - "conductive fillers" - "conductive polymer foams" - "conductive TPU foam" - "Flexible Electronics" - "foam 3D printing" - "foam additive manufacturing" - "Foam Morphology" - "fused-filament foam printing" - "nozzle temperature" - "printing parameters" - "printing velocity" - "thermoplastic polyurethane foam" - "wearable electronics" --- [Home](https://www.plasticsengineering.org/) » [News](https://www.plasticsengineering.org/news/) » [Process](https://www.plasticsengineering.org/c/process/) » [3D Printing/Additive Manufacturing](https://www.plasticsengineering.org/c/process/3d-printing-additive-manufacturing/) » Thermoplastic Polyurethane Foams for Wearable Electronics # Thermoplastic Polyurethane Foams for Wearable Electronics The effectiveness of 3D-printed conductive foam depends heavily on printing parameters. ### Foam Additive Manufacturing tunes TPU foam conductivity for flexible electronics by adjusting temperature and print speed. Conductive polymer foams provide a lightweight, low-density material choice for flexible and wearable electronics applications. When printing conductive foams, printing parameters can influence the foam’s electrical and mechanical properties. In a recent study, researchers [fabricated conductive TPU foams using FAM](https://www.sciencedirect.com/science/article/pii/S0264127526006647) . This process leverages CO2 absorption and fused-filament foam (FFF) printing. Through this study, they developed a reproducible framework for controlling the foaming process for optimized conductive performance. Printing paths and parameters impact the properties of conductive foams. Courtesy of [Morphology-dependent electrical response of CO2-foamed conductive TPU filaments fabricated by foam additive manufacturing.](https://www.sciencedirect.com/science/article/pii/S0264127526006647) ## Conductive Foams: How They Function Conductive foam composites function due to the addition of fillers such as carbon black, Carbon Nanotube (CNT), graphene, or metallic nanoparticles. Increasing filler content can increase conductivity, but can elevate viscosity and lead to agglomeration. Thus, strategies to enhance electrical performance while maintaining processability and mechanical integrity must be employed. **You can also read:** [AM and Conductive Polymers: Next-Gen Aerospace Electronics.](https://www.plasticsengineering.org/2026/03/am-and-conductive-polymers-next-gen-aerospace-electronics-010818/) ## Effects of Bubbles and Foam Density Gas bubbles from the polymer foaming process can significantly alter the behavior of conductive polymer composites. Bubbles can change the orientation and interconnection of conductive fillers, promoting interconnectivity and network formation. This can enhance the material’s electrical conductivity and is affected by bubble size. Excessive void fractions can, in turn, disrupt the filler network, decreasing conductivity. Large cells can cause fillers to orient tangentially, limiting interconnectivity. On the contrary, excessively small cells may cause opposing forces to be exerted, thus negating the benefits of reoriented filler. Low-density foams with high porosity and thin cell walls may not form a continuous conductive network at all. ## Optimizing Conductive TPU Foam During extrusion, researchers observed whether viscoelastic die swell occurred under the processing conditions for filaments with and without foaming. For filaments without foaming, the filament diameter remained nearly constant. Thus, the die swell observed in foamed filaments originated from the foaming process rather than viscoelastic contributions. Foamed filaments showed an increase in expansion ratio at intermediate inlet velocity values, demonstrating gas expansion’s role in filament swelling. Quantifications of die swell can thus aid in process parameter selection. Expansion ratio (Ψ) increased at intermediate inlet velocity values (Vin) for foamed filament (right, not-foamed shown left). Courtesy of [Morphology-dependent electrical response of CO2-foamed conductive TPU filaments fabricated by foam additive manufacturing.](https://www.sciencedirect.com/science/article/pii/S0264127526006647) Researchers used scanning electron microscopy (SEM) cross-section images to determine the effect of process parameters on foam morphology. They observed that porosity was higher at 200 °C and 230 °C than 220 °C. Viscosity and melt strength decrease with increasing temperature. This leads to bubble expansion and increased nucleation rates but weakening mechanical properties. At 220 °C, trade-offs among mechanical properties lead to coalescence and partial collapse, thus lowering porosity. At a high inlet velocity, cell walls are thinner and more prone to collapse. This reduces the quality and stability of the cellular network. ## Foam Filaments for Soft Electronics Additive manufacturing benefits engineers by enabling rapid iteration cycles and greater design freedom. For emerging markets such as wearable electronics and conductive fabrics, innovative approaches like this enable new design opportunities. Achieving tailored conductivity by adjusting process parameters and cell morphology shows potential for use in these applications. This framework could influence design approaches for distributed resistive networks, soft interconnects, or heating elements. By **[Julienne Smith](https://www.plasticsengineering.org/author/juliennesmith/)** | September 4, 2026 ##### [Julienne Smith](https://www.plasticsengineering.org/author/juliennesmith/) [+ postsBio ⮌](#) Having studied Geology, Julienne Smith focuses on environmentalism, sustainability, and the policies that impact plastics professionals today. As a technical writer, she is passionate about the intersection of science, technology, and communication. In her free time, she loves learning new things and writing fiction. - Julienne Smith [Polymer Coating Improves Flame Retardancy in Bamboo](https://www.plasticsengineering.org/2026/08/polymer-coating-improves-flame-retardancy-in-bamboo-011831/) - Julienne Smith [PLA Foam Aircraft Wings Use Nature-Inspired Design](https://www.plasticsengineering.org/2026/07/pla-foam-aircraft-wings-use-nature-inspired-design-011770/) - Julienne Smith [Recycled Cobalt Pigment Adds Color and Flame Retardancy to PLA](https://www.plasticsengineering.org/2026/07/recycled-cobalt-pigment-adds-color-and-flame-retardancy-to-pla-011765/) - Julienne Smith [Core-Shell Flame Retardant Reduces Migration in PA66](https://www.plasticsengineering.org/2026/07/core-shell-flame-retardant-reduces-migration-in-pa66-011756/) ### Other posts you could read [August 20, 2026Xenia HM Upgrade Boosts Carbon Fiber Composite Stiffness](https://www.plasticsengineering.org/2026/08/xenia-hm-upgrade-boosts-carbon-fiber-composite-stiffness-011906/) [August 17, 2026How Product Design Shapes Medical Plastics Recovery](https://www.plasticsengineering.org/2026/08/how-product-design-shapes-medical-plastics-recovery-011787/) [August 6, 2026Plastics in Menstrual Products: Performance, Safety, and Sustainability](https://www.plasticsengineering.org/2026/08/plastics-in-menstrual-products-performance-safety-and-sustainability-011835/) [August 7, 2026Digital Process Control Supports Stable Molding of PCR and PIR](https://www.plasticsengineering.org/2026/08/digital-process-control-supports-stable-molding-of-pcr-and-pir-011843/) [August 11, 2026PA6F Nanofiber Membranes Offer Sustainable PFAS Removal](https://www.plasticsengineering.org/2026/08/pa6f-nanofiber-membranes-offer-sustainable-pfas-removal-011858/) [August 31, 2026How Plastics Supply Chains Became Global Networks](https://www.plasticsengineering.org/2026/08/how-plastics-supply-chains-became-global-networks-011920/) [August 6, 2026Recycled Plastics in Electronics Housings Face Heat and Compliance Limits](https://www.plasticsengineering.org/2026/08/recycled-plastics-in-electronics-housings-face-heat-and-compliance-limits-011792/) [August 4, 2026Polymer Coating Improves Flame Retardancy in Bamboo](https://www.plasticsengineering.org/2026/08/polymer-coating-improves-flame-retardancy-in-bamboo-011831/) ## Share Your Thoughts [Cancel reply](/2026/09/thermoplastic-polyurethane-foams-for-wearable-electronics-012011/#respond) - [https://twitter.com/share?url=https://www.plasticsengineering.org/?p=12011&text=Thermoplastic+Polyurethane+Foams+for+Wearable+Electronics&via=Plastics_Mag](https://twitter.com/share?url=https://www.plasticsengineering.org/?p=12011&text=Thermoplastic+Polyurethane+Foams+for+Wearable+Electronics&via=Plastics_Mag) - [https://www.facebook.com/sharer.php?u=https://www.plasticsengineering.org/?p=12011&t=Thermoplastic+Polyurethane+Foams+for+Wearable+Electronics](https://www.facebook.com/sharer.php?u=https://www.plasticsengineering.org/?p=12011&t=Thermoplastic+Polyurethane+Foams+for+Wearable+Electronics) - [https://www.linkedin.com/shareArticle?mini=true&url=https://www.plasticsengineering.org/?p=12011&title=Thermoplastic%20Polyurethane%20Foams%20for%20Wearable%20Electronics&summary=Foam+Additive+Manufacturing+tunes+TPU+foam+conductivity+for+flexible+electronics+by+adjusting+temperature+and+print+speed.&source=Plastics+Engineering](https://www.linkedin.com/shareArticle?mini=true&url=https://www.plasticsengineering.org/?p=12011&title=Thermoplastic%20Polyurethane%20Foams%20for%20Wearable%20Electronics&summary=Foam+Additive+Manufacturing+tunes+TPU+foam+conductivity+for+flexible+electronics+by+adjusting+temperature+and+print+speed.&source=Plastics+Engineering) - [https://www.reddit.com/submit?url=https://www.plasticsengineering.org/?p=12011&title=Thermoplastic+Polyurethane+Foams+for+Wearable+Electronics](https://www.reddit.com/submit?url=https://www.plasticsengineering.org/?p=12011&title=Thermoplastic+Polyurethane+Foams+for+Wearable+Electronics) - [/cdn-cgi/l/email-protection#5e612d2b3c343b3d2a630e323f2d2a373d2d7e1b303937303b3b2c3730397e737e0a363b2c33312e323f2d2a373d7e0e3132272b2c3b2a363f303b7e18313f332d7e38312c7e093b3f2c3f3c323b7e1b323b3d2a2c3130373d2d783c313a2763362a2a2e2d647171292929702e323f2d2a373d2d3b303937303b3b2c37303970312c3971612e636f6c6e6f6f](/cdn-cgi/l/email-protection#5e612d2b3c343b3d2a630e323f2d2a373d2d7e1b303937303b3b2c3730397e737e0a363b2c33312e323f2d2a373d7e0e3132272b2c3b2a363f303b7e18313f332d7e38312c7e093b3f2c3f3c323b7e1b323b3d2a2c3130373d2d783c313a2763362a2a2e2d647171292929702e323f2d2a373d2d3b303937303b3b2c37303970312c3971612e636f6c6e6f6f) - [#comments](#comments)