--- title: "Q2 Plastics Economy Is Holding Its Own in Difficult Times" id: "1350" type: "post" slug: "q2-plastics-economy-is-holding-its-own-in-difficult-times" published_at: "2023-07-18T14:24:16+00:00" modified_at: "2026-04-27T16:41:27+00:00" url: "https://www.plasticsengineering.org/2023/07/q2-plastics-economy-is-holding-its-own-in-difficult-times-001350/" markdown_url: "https://www.plasticsengineering.org/2023/07/q2-plastics-economy-is-holding-its-own-in-difficult-times-001350.md" excerpt: "Second-quarter results show mixed signs for the U.S. industry's key sector." taxonomy_category: - "Automotive & Transportation" - "Business" - "Durables" - "Foam Processing" - "Industry" - "Materials" - "Packaging" - "Process" - "Resins" - "Trending" taxonomy_post_tag: - "economic results" - "Perc Pineda" - "plastics equipment production" - "Plastics Industry Association" - "plastics product manufacturing" --- [Home](https://www.plasticsengineering.org/) » [News](https://www.plasticsengineering.org/news/) » [Industry](https://www.plasticsengineering.org/c/industry/) » [Automotive & Transportation](https://www.plasticsengineering.org/c/industry/automotive-transportation/) » Q2 Plastics Economy Is Holding Its Own in Difficult Times # Q2 Plastics Economy Is Holding Its Own in Difficult Times U.S. plastics product manufacturing began to increase in 2Q 2023 after almost a year of decline. Courtesy of Plastics Industry Association### Second–quarter results show mixed signs for the U.S. industry’s key sector, expert says Perc Pineda The U.S. plastics economy is “doing better but not great,” says Perc Pineda, chief economist of the Plastics Industry Association. Still, he noted in a July 13 interview: “I’m less pessimistic now than I was six months ago, but I remain concerned considering that we had anticipated hitting the belly of the curve in first quarter of 2023 … and we didn’t.” In its recently released economic second-quarter outlook report, the Washington, D.C.-based trade association (which refers to itself as PLASTICS) said it has revised its previous forecast for plastic materials, resin production and plastics machinery production. It now expects a lesser decrease in resin production for all of 2023 compared to 2022, and it has downgraded U.S. plastics machinery production for 2023. On the other hand, PLASTICS sees plastic product manufacturing output slipping at a lower rate this year, which represents a slight improvement over its previous forecast. And, it has upgraded its projection of mold production for plastics manufacturing to an increase compared with a previously forecasted decline. ## **Lower Inflation Helps the Cause** The overall economy got some welcome news recently when the government reported that U.S. inflation fell to 3 percent in June, its lowest annual rate in more than two years. “It’s good news that inflation is coming down,” Pineda said, “but is it fast enough for the [Federal Reserve Board]” to fend off further interest rate hikes?” Much of the country’s post-COVID growth was debt-fueled, he pointed out, so the Fed “finds itself stepping on the brakes on the economy, while fiscal policy appears to be simultaneously pressing on the gas pedal.” Plastic product manufacturing is also showing some signs of improvement, Pineda said, noting that May showed increases of 0.2 percent over the previous month (June figures are not yet published). A year ago, the sector showed a 4.5 percent decline from the previous year. The uptick reflects “a lower consumption pullback in durable and nondurable goods during the first half of 2023 than initially expected,” he wrote in the latest report. “As a result, the rate of inventory buildup is expected to be lower, necessitating production adjustments.” (Pineda said he has a new blog coming out soon on the [www.plasticsindustry.org](http://www.plasticsindustry.org/) website that will assess capacity utilization rates for plastics production.) “There’s a lot of slack in plastic product manufacturing now,” he noted. That said, while both the automotive and housing sectors have improved a bit in recent months, he questions whether those gains will hold. If the pace of retail sales slow, inventory will turn over more slowly, which could negatively impact production. ## **Slowing Resin and Machinery Output** An ample supply of resin exists in the market, so there is no need to produce as much, hence the downward revision of output for the rest of this year. As for the plastics equipment sector, high interest rates impact capital expenditures such as these, Pineda noted. Data indicate that machinery production decreased by 1.2 percent in Q2 2023, following a 7 percent increase in Q1, he wrote in the recent report. The Q1 increase may have been due to production backlogs, however, rather than new orders. Finally, as for U.S. plastics and rubber manufacturing employment trends, Pineda declared: “The labor market cannot stay this strong for long.” The sector’s unemployment rate in April was just 0.8 percent, rising slightly to 1.8 percent in June. Historically, he said, the rate is typically 4-5 percent, even in good years. “It is anticipated,” he wrote in the report, “that the unemployment rate in plastics and rubber products manufacturing in 2023 will be higher than the 3.3 percent recorded in 2022.” Full economic data and industry analyses are available to PLASTICS members. Learn more at [www.plasticsindustry.org](http://www.plasticsindustry.org/) . By **[Robert Grace](https://www.plasticsengineering.org/author/bobrcgrace-com/)** | July 18, 2023 ##### [Robert Grace](https://www.plasticsengineering.org/author/bobrcgrace-com/) [+ postsBio ⮌](#) ### Other posts you could read [April 30, 2026Upcycling Polyolefins into Jet Fuel Components](https://www.plasticsengineering.org/2026/04/upcycling-polyolefins-into-jet-fuel-components-011138/) [May 7, 2026PCR Plastics Are Redefining Aesthetic Standards](https://www.plasticsengineering.org/2026/05/pcr-plastics-are-redefining-aesthetic-standards-011186/) [April 13, 2026Upcycling PET Through Artificial Photosynthesis](https://www.plasticsengineering.org/2026/04/upcycling-pet-through-artificial-photosynthesis-010940/) [April 21, 2026Flame-Resistant Polymers for Space Safety and Aerospace Use](https://www.plasticsengineering.org/2026/04/flame-resistant-polymers-for-space-safety-and-aerospace-use-011162/) [April 27, 2026Nanocomposite Films from Car Bumper Waste](https://www.plasticsengineering.org/2026/04/nanocomposite-films-from-car-bumper-waste-011041/) [May 6, 2026Reinforcement Learning for Polymer Design and Manufacturing](https://www.plasticsengineering.org/2026/05/reinforcement-learning-for-polymer-design-and-manufacturing-011146/) [May 4, 2026Why Your Feeder Choice Is Quietly Undermining Consistency](https://www.plasticsengineering.org/2026/05/why-your-feeder-choice-is-quietly-undermining-consistency-011175/) [April 28, 2026IKV Colloquium 2026: The Journey of Research and Industry](https://www.plasticsengineering.org/2026/04/ikv-colloquium-2026-the-journey-of-research-and-industry-010989/) ## Share Your Thoughts [Cancel reply](/2023/07/q2-plastics-economy-is-holding-its-own-in-difficult-times-001350/#respond) - [https://twitter.com/share?url=https://www.plasticsengineering.org/?p=1350&text=Q2+Plastics+Economy+Is+Holding+Its+Own+in+Difficult+Times&via=Plastics_Mag](https://twitter.com/share?url=https://www.plasticsengineering.org/?p=1350&text=Q2+Plastics+Economy+Is+Holding+Its+Own+in+Difficult+Times&via=Plastics_Mag) - [https://www.facebook.com/sharer.php?u=https://www.plasticsengineering.org/?p=1350&t=Q2+Plastics+Economy+Is+Holding+Its+Own+in+Difficult+Times](https://www.facebook.com/sharer.php?u=https://www.plasticsengineering.org/?p=1350&t=Q2+Plastics+Economy+Is+Holding+Its+Own+in+Difficult+Times) - [https://www.linkedin.com/shareArticle?mini=true&url=https://www.plasticsengineering.org/?p=1350&title=Q2%20Plastics%20Economy%20Is%20Holding%20Its%20Own%20in%20Difficult%20Times&summary=Second-quarter+results+show+mixed+signs+for+the+U.S.+industry%27s+key+sector.&source=Plastics+Engineering](https://www.linkedin.com/shareArticle?mini=true&url=https://www.plasticsengineering.org/?p=1350&title=Q2%20Plastics%20Economy%20Is%20Holding%20Its%20Own%20in%20Difficult%20Times&summary=Second-quarter+results+show+mixed+signs+for+the+U.S.+industry%27s+key+sector.&source=Plastics+Engineering) - [https://www.reddit.com/submit?url=https://www.plasticsengineering.org/?p=1350&title=Q2+Plastics+Economy+Is+Holding+Its+Own+in+Difficult+Times](https://www.reddit.com/submit?url=https://www.plasticsengineering.org/?p=1350&title=Q2+Plastics+Economy+Is+Holding+Its+Own+in+Difficult+Times) - [/cdn-cgi/l/email-protection#b986caccdbd3dcdacd84e9d5d8cacdd0daca99fcd7ded0d7dcdccbd0d7de999499e88b99e9d5d8cacdd0daca99fcdad6d7d6d4c099f0ca99f1d6d5ddd0d7de99f0cdca99f6ced799d0d799fdd0dfdfd0daccd5cd99edd0d4dcca9fdbd6ddc084d1cdcdc9ca839696cecece97c9d5d8cacdd0dacadcd7ded0d7dcdccbd0d7de97d6cbde9686c984888a8c89](/cdn-cgi/l/email-protection#b986caccdbd3dcdacd84e9d5d8cacdd0daca99fcd7ded0d7dcdccbd0d7de999499e88b99e9d5d8cacdd0daca99fcdad6d7d6d4c099f0ca99f1d6d5ddd0d7de99f0cdca99f6ced799d0d799fdd0dfdfd0daccd5cd99edd0d4dcca9fdbd6ddc084d1cdcdc9ca839696cecece97c9d5d8cacdd0dacadcd7ded0d7dcdccbd0d7de97d6cbde9686c984888a8c89) - [#comments](#comments)